Its coming from the top of the bell housing and has soaked the transmission and leaking on the exhaust crossover pipe I drive a jeep (albeit a wrangler, i'm still a jeep owner and fan).actually, i drove a dodge (before they changed the name to ram) for 20+ years prior to From what i can see its coming from the oil cooler
Jeep Wrangler With 3.6L Leaking Oil (Look HERE first)
I had my jeep in to change the front inner axle seals about.
If your jeep jk (2013 model with ~120,000 miles) is experiencing a sudden coolant leak near the bell housing, it's likely due to a cracked oil cooler
Replacing the oil cooler, especially with an aluminum dorman unit, is a common solution However, be aware that a severe leak can lead to overheating and potentially warped cylinder heads. Facing jeep wrangler oil leaks Jeep auto care provides solutions for common causes, including oil cooler leaks
Hey y'all could use some advice I have a 2021 jeep wrangler willys with 82k, regular oil changes and maintenance at local jeep dealership I notice some oil on the driveway apart from where i typically parked Assumed it was from an older vehicle (i get significant traffic from nurses caring.
How will you know if your oil cooler is leaking
Easy, you will see motor oil on your upper and lower transmission bell housing. There is more oil dripping out of my wrangler than i ever thought possible I can't fix it and all mechanics in my area refuse to work on jeeps Did the oil cooler and now it leaks worse, so far its.
That annoying drip just might be resolved. At just over 5,000 miles i think have developed an oil cooler leak The other day while doing some mild wheeling i began to smell burning oil smoke I stopped at the first place i could and looked under the jeep and found a small amount of engine oil dripping down the left side of the.
I didn't know squat about that cooler/filter housing until i cruised this forum and of course, attended youtube university and majored in the jeep jk 3.6l pentastar oil filter/cooler problems and repair/replacement.
We have a 2013 jeep sahara with a 3.6 We have changed our oil cooler 3 times After we drive it about 200 miles it will start leaking We've put on the dorman metal unit, bought the cheaper brand from amazon and now have put the oem from dodge and having same problem
We've changed o rings made. Dorman has a new aluminum oil filter and cooler housing out for the pentastar, made in the us (for now) This adapter doesn't solve anything, and it won't prevent a lube tech or quick lube from torquing the hell out of the filter which causes the problem. Just installed a standard motor products ps287 in my 2.4l
The old sensor was actually leaking oil through the body, so in addition to fixing the low oil pressure light it helped me fix an oil leak
No issues so far with the new unit. We have a massive selection of quality parts online Browse our catalog to find the exact part that you need.
